New book:DIY Off-Grid Solar, Start to FinishDIY Off-Grid SolarKindle $4.99, digital downloadPaperback $29.99, 370+ pages, 120+ diagrams
Free shipping on SunGold Power and Ruixu BatteryIntegraRack ships by quote.Locally owned solar store in Salem, Oregon

Call Us 971-374-7829

Free shipping on SunGold Power and Ruixu Battery. Shipping calculated at checkout on EG4. IntegraRack ships by quote.

SunGold Power SGN-11K15PRO 11.4kW 48V split phase hybrid inverter

Hybrid Solar Inverter for Home Backup

Short answer: A hybrid solar inverter can keep a house running during an outage only if it is designed for backup and paired with a battery that can carry the loads you leave on. Decide first between whole-home backup and a critical loads panel, then compare output, transfer time, and battery voltage.

Key takeaways

  • The Department of Energy says solar-plus-battery systems rely on advanced inverters to operate without any support from the grid in an outage, if they are designed to do so.
  • Whole-home backup and a critical loads panel are different jobs. One needs a high-amp path and a large battery. The other backs up a short list of circuits and is easier to size.
  • On a typical U.S. house, look for 120/240V split-phase output and a battery voltage that matches the bank, often 48V in this catalog.
  • This is a backup-focused buying guide. For a general datasheet walkthrough, see the 2026 hybrid inverter buyer’s guide. For the load math, see how to size a hybrid inverter.

Here is how backup works.

How does a hybrid solar inverter back up a house?

In normal weather, a hybrid inverter can send solar to the house first, charge a battery with what is left, and use the utility for any shortfall. When the grid drops, a backup-capable unit disconnects from the utility and forms a local AC source from the battery, and from the solar array if the sun is up and the inverter allows it. The circuits you planned for stay on.

That islanding behavior is not automatic on every inverter. The Department of Energy’s inverter and grid services basics page is direct about this: solar-plus-battery systems rely on advanced inverters to operate without grid support during outages, if they are designed to do so. A standard grid-tie string inverter is built to shut down when the utility fails.

If you are still deciding whether a hybrid is the right type, start with Do I need a hybrid inverter? and the off-grid vs hybrid comparison. This article focuses on buying a hybrid for backup on a grid-connected house.

Whole-home backup or a critical loads panel: which do you need?

This is the decision that should come before you pick a kilowatt number. Whole-home backup means the inverter and transfer equipment can keep the main service, or nearly all of it, available during an outage. Several hybrids here are listed with a 200A whole-home or AC bypass path, including the SunGold Power SGN-11K15PRO 11.4kW, the SunGold Power SGS-12K18MAX 12kW, and the EG4 18kPV, which lists a 200A AC bypass.

A 200A path is not the same thing as 200A of inverter output. The bypass rating describes how much utility or pass-through current the equipment can handle. The inverter’s continuous AC rating is what it can produce from the battery and PV when the grid is gone. The 18kPV, for example, is listed at 12,000W at 240V, which will not run every load in a large house at once. Whole-home backup still works best when you can shed heavy loads.

A critical loads panel is the more modest approach. An electrician installs a subpanel with the circuits you care about most, such as lighting, refrigeration, a well pump, or a furnace blower. The hybrid inverter backs up that subpanel, not the entire service. You buy less inverter output and less battery, and you get a clearer picture of what will still be on during an outage.

What should you look for when you buy a hybrid inverter for backup?

Once the backup scope is clear, compare the datasheet fields that actually affect an outage. The table below uses only figures from live product pages. It is a shopping checklist, not a ranking.

Feature to compare Why it matters for home backup Catalog examples (from live product pages)
Continuous AC output Sets how many loads can run at once during an outage EG4 18kPV: 12,000W at 240V. SunGold SGN-11K15PRO: 11.4kW. FlexBOSS21: 16kW with PV, 12kW on battery only
Backup or AC bypass rating Tells you whether the unit can sit in a whole-home path, often 200A EG4 18kPV: 200A AC bypass. SunGold SGN-11K15PRO and SGS-12K18MAX: 200A whole-home backup
Transfer time How quickly the inverter picks up the loads when the grid drops EG4 18kPV: 20 ms default, 10 ms configurable
Output type A typical U.S. house needs 120/240V split phase to run both ordinary and 240V circuits All three examples above are listed as split phase
Battery voltage and charge current The bank has to match the inverter, often 48V, with enough charge and discharge current EG4 18kPV: 48V battery, 250A max charge and discharge. FlexBOSS21: 48V
PV input The array has to fit the inverter’s watt and voltage window if solar will recharge the battery during an outage EG4 18kPV: 18,000W max utilized PV. FlexBOSS21: 21kW max PV input

Continuous output with PV and on battery only can be different numbers. The EG4 FlexBOSS21 is listed at 16kW continuous with PV and 12kW on battery only, with a 48V battery, split-phase output, 21kW maximum PV input, and UL 1741 and CEC listings. If the outage lasts after sunset, the battery-only rating is the one that matters.

Transfer time is easy to skip and hard to fix later. The 18kPV lists 20 ms by default, or 10 ms if you configure it that way. That is a model-specific figure. If a transfer time is not on the product page, look it up on the datasheet for that model.

Listings and interconnection matter too. A UL 1741 listing, and any utility or CEC listing the product page shows, are part of whether the inverter can be connected as designed. Backup wiring, automatic transfer, and bonding have to follow the National Electrical Code and local rules, and should be installed by a qualified electrician.

How do you size a hybrid inverter and battery for outages?

Size the inverter to the watts that will run at the same time during an outage, including motor surge. Size the battery to the kWh those loads will use for the outage length you actually care about. A three-hour blink and a two-day storm are different batteries.

Do not invent a runtime from a round number in an ad. Add the loads, use their nameplate watts and a realistic number of hours, and convert that to kWh. Then pick a bank with enough usable energy at the inverter’s battery voltage. Many of the hybrids here are 48V-class units that pair with 48V batteries. The 18kPV lists 250A maximum charge and discharge on a 48V bank.

The solar calculator is a good first pass for panel count. For the inverter sizing sequence, use How to Size a Hybrid Inverter for Your Home. This page will not repeat that math. Decide backup scope, transfer, and whole-home versus critical loads before you size anything.

How do you match solar panels and a battery to the inverter?

Backup is more useful if the array can recharge the battery during the day while the grid is still down. That only works if the solar panels fit the inverter’s PV watt and voltage window. Check maximum utilized PV, MPPT range, and cold-weather Voc. An 18,000W PV input on the 18kPV, or 21kW on the FlexBOSS21, is a ceiling, not a target you have to hit.

The battery has to match the inverter’s voltage, and preferably its communications protocol. A 48V hybrid is not a casual match for a high-voltage battery, or the other way around. The SGS-12K18MAX product page, for example, offers the inverter alone or bundled with PowerMax 314 Outdoor batteries at 16.07 kWh or 32.14 kWh. Read the current bundle options on that page, because they can change.

When you are ready to buy, start in hybrid inverters, confirm the unit against the parent inverters list, and keep the panel and battery categories open so the three pieces fit. For a broader datasheet comparison, use the 2026 hybrid inverter buyer’s guide.

Frequently asked questions

Can a hybrid solar inverter power a house during an outage?

Yes, if the inverter is designed for backup, the battery is large enough for the loads you keep on, and the transfer equipment is installed correctly. The Department of Energy says solar-plus-battery systems rely on advanced inverters to operate without grid support during outages, if they are designed to do so. A standard grid-tie inverter is usually not that device.

What is the difference between whole-home backup and a critical loads panel?

Whole-home backup tries to keep the main service, or a very large share of it, available during an outage, often with a high-amp automatic transfer path. A critical loads panel is a smaller subpanel of the circuits you care about most, such as lights, refrigeration, well pump, or a furnace blower. Whole-home needs more inverter output and more battery. A critical loads panel is easier to size and is enough for many houses.

How fast should a hybrid inverter transfer when the grid goes down?

Fast enough that your sensitive loads do not drop, if that matters to you. Transfer time is a datasheet number, and it varies by model. The EG4 18kPV product page lists a default transfer time of 20 ms, configurable to 10 ms. Read the number on the inverter you are buying, and ask a qualified electrician how that interacts with the transfer equipment in your panel.

What size battery do I need with a hybrid inverter for backup?

Size the battery to the kWh you want to ride through, not to a generic ‘days of backup’ claim. List the loads that will stay on, estimate their kWh for the outage length you care about, and choose usable battery energy at the inverter’s battery voltage, often 48V in this catalog. The solar calculator can help with a first pass. The existing hybrid inverter sizing guide covers the load math in more detail.

Do I need split-phase 120/240V for a U.S. house?

Most U.S. houses use a split-phase 120/240V service. 120V covers ordinary outlets and lights. 240V covers larger appliances such as a well pump, dryer, or range. If you want those 240V loads on backup, the inverter has to provide split-phase output, or you need a listed transformer arrangement designed for that job. Check the output rating on the product page.

Where should I shop for a hybrid inverter for home backup?

Open the hybrid inverters category, then confirm 120/240V split-phase output, battery voltage, backup or bypass rating, and PV input against your array. The parent inverters category is the wider list if you are still comparing types. Match the unit to a 48V battery from the batteries category and to solar panels that fit the DC window.

New book:

DIY Off-Grid Solar, Start to Finish.

Off-grid only, written for beginners who want to do the work carefully.

Kindle, $4.99 through New Year's: instant digital download. Paperback, $29.99: 370+ pages, 120+ diagrams, full-size 8.5 x 11 printed copy.

DIY Off-Grid Solar, Start to Finish book
Talk to a real person

Talk to a real person

100% Secure Checkout

MasterCard / Visa / American Express